SEQSET
Bulk Data Entry Defines the generalized degrees-of-freedom of the superelement for use in One-Step Superelement Analysis.
Format
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| SEQSET | SEID | G1 | C | G2 | C | G3 | C |
Example
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| SEQSET | 11 | 23 | 123456 | 8 | 1 | 5 | 3 |
Definitions
| Field | Contents | SI Unit Example |
|---|---|---|
| SEID | Superelement
identification number. No default (Integer ≥ 0) |
|
| Gi | Grid or Scalar Point
identification numbers (should be an external point). Default = Blank (Integer > 0) |
|
| Ci | Component
numbers. Integer zero or blank for scalar points, or up to six unique digits (0 < digit ≤ 6) may be placed in the field with no embedded blanks for grid points. The components refer to the coordinate system referenced by the grid points. |
Comments
- Degrees-of-freedom on SEQSET entry should not be used on any other superelement.