Define Translation Motion

Use Translation tool to define linear mesh translation on solid bodies or surfaces.

  1. From the Motion ribbon, click the Translation tool.


    Figure 1.
  2. Select surfaces and/or solids.
    Use the guide bar selectors to filter which entity type you can select.
  3. Click Vector on the guide bar.
  4. Left-click to position the vector in the modeling window.
    Tip: Use snap points to position the vector on existing points, lines, surface centers, etc.
  5. Use the options in the microdialog to further align the vector.
    • Click to flip the rotation direction.
    • Click X, Y, or Z to align to the global axes.
    • Click to position the vector using the Vector tool. Once the position is defined, press Esc to return to the current context.
    • Click to enter vector coordinates.
  6. In the microdialog, select a motion definition type then define the motion.
    Option Description
    Constant Define a constant velocity.
    Time Varying
    1. Click .
    2. In the dialog, define a basis for motion variation, a motion input, and a data interpolation type.
    3. Use the table and the plot area to create a data set.
    4. Exit the dialog.
    Sinusoidal
    1. Click .
    2. In the dialog, define a motion input.
    3. Enter values for frequency, phase, and amplitude.
    4. Exit the dialog.
  7. From the guide bar, execute the command in the following ways:
    • Click to confirm your selection and remain in the tool.

      This allows you to continue creating instances and helps you visualize and edit instances with the legend.

    • Click to confirm your selection and exit the tool.