Define Robscan Weld
Defining a robscan weld with the FEMSITE utility.
Before you begin, Setup the FEMSITE Utility.
-
From the menu bar, click Connectors > FEMSITE > Define Robscan.
The Rob Scan Data dialog opens.
-
Using the Select Connectors selector, select input.
- Choose Nodes to select a node location as input.
- Choose Connectors to select an exiting connector, for example a connector imported from a connector file.
- In the Property ID field, enter an ID to be sent to the FEMSITE executable.
-
Select a weld pattern.
The values in the Width, Length, Seam Width, and Gap Size fields are populated after a Weld Pattern has been selected.
-
Define part search parameters.
- For RefMode, choose to use the Property or Part ID as the reference mode for connector assignment.
-
Using the Select Components selector, select the components that
contain the parts to search.
The RefList field lists the assigned IDs that are found after components are selected.
- In the Max number of interactions field, enter the maximum number of connector links to create.
- In the Maximum distance field, enter the search tolerance the FEMSITE executable should use for realization.
-
Define the orientation of the weld.
- In the Pattern Orientation Vector (X) fields, enter the triad (x,y,x) and orientation angle.
- To reverse both direction inputs, enable the Invert robscan direction (Z) checkbox.
- To reverse the pattern orientation, enable the Invert pattern Orientation checkbox.
- To preview the orientation of the weld, click ?.
- Click Define.