What's New
View new features for HyperGraph 2D 2020.1.
Altair HyperGraph 2020.1 Release Notes
General
New Features
- Stackmath
- The Add Stackmath Operation supports multiple arguments for individual parameters. Use the entity editor to change the parameter options.
- Bar plot improvements
- From the 2D View Controls toolbar, click Flip XY to flip the axes and create horizontal category labels.
New Readers
- Exodus
- The Exodus reader in HyperGraph allows you to plot results for .frq and .ex2 files generated from the Exodus solver.
- HBM Test Files
- Support for HBM temperature measurement test data files. The supported file extension is .tem.
- Animator .a4db
- Support for .a4db files with curve data from the Animator database. HyperGraph supports LS-DYNA and Abaqus solver-based .a4db files.
- Seam
- Seam reader in HyperGraph allows you to plot seam results in the form of .out files. This reader is available with an environment variable (HW_ENABLE_SEAMREADER = 1).
Enhancements
- Plot Browser enhancements:
- Symbol attributes added to the Plot Browser's entity editor, visible when a curve is selected from the Plot Browser.
- X and Y curve vector units are supported through the Plot Browser's entity editor. A units block for X and Y vectors to change curve units from the Plot Browser using the entity editor.
- Label Prefix and Label Suffix are updated with new options MaxY and At X. Select these options in the entity editor to display the maximum Y value of the curve with the X coordinate in the legend as a label.
- Curve prefix and suffix shortcuts in a Templex expression from the Plot Browser's entity editor. For example, a note attached to a curve can access suffix and prefix information using a Templex expression such as {p1w1c1.suffix} and {p1w1c1.suffix}.
- Macro panels support multiple arguments for parameters.
- Value-based curves can be exported as an RPC file, along with previously supported file-based curves.
- Previously, if a CSV file with blank spaces was imported into HyperGraph, the reader ignored the data after the blank space. To address this, from the Plot Browser's entity editor, select Bridge handles the blank spaces by creating a bridge in the plotted curve and Gap handles the blank spaces by displaying a gap in the plotted curve. option.
- HyperGraph supports RPC3 files created by a floating point format and a short integer format, reading results properly.
- Filter added to Channel Mapping in the Flexible Report Templates dialog. Filter data types and requests with a string. Wild card support is not available.
Resolved Issues
- Tic increment value of zero causes HyperGraph to close unexpectedly.
- readsim function issue when sorting element IDs.
- Requests not populating in the Build Plots dialog after loading the file into the HyperView Build Plots panel.
- Copy/paste issue with 3D curves.
- In the Build Plots dialog, added a filter for X vector requests.
- Issue related to curve offset using TPL with flexible report template.
- Acceleration time history can be plotted in HyperGraph using results from an Abaqus ODB file. The acceleration time history can then be exported as a DAC file and then imported into nCode for further data processing. When exporting the curve data to the DAC file from HyperGraph, the units were not exported properly, which caused errors during data processing.
Solver Interfaces
LS-DYNA Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Support for airbag material leakage data (from LS-DYNA R11.1). ABSTAT LS-DYNA BINOUT file with ELOUT subcase properly displays beam history results in HyperGraph. BINOUT ELOUT
Support for legend block in DISBOUT file (from LS-DYNA R11.1). DISBOUT Support for legend block in SSSTAT file (from LS-DYNA R11.1). SSSTAT
OptiStruct Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Support .spcf generated from NLSTAT analysis. .spcf Support plotting mode versus frequency directly from .out files. .out Support acoustic analysis results from PCH files. .pch HyperGraph reader extracts OptiStruct mass by property/component values. .out Support for .pret and .secrec files. .pret .secrec
Export curves in the OptiStruct TABLEG format. .tableg
PAM-CRASH 2G Interface
New Features
- IMPLICIT ERF (HDF5) Support
- The HyperGraph reader supports IMPLICIT domain results from Acoustic, Random response analysis results from ERFH5, and femzip ERF.FZ files. Newly supported result types include Complex Mean Internal Energy, Complex Wave Internal Energy, Mean Squared Normal Velocity, Complex Translational Acceleration, Harmonic Internal Energy, ACOUSTIC_NODE and POROUS_NODE.
Enhancements
- Reader enhancements
-
Summary Supported Format IMPLICIT domain results from Acoustic and Random response analysis are supported. .erfh5 and .erf.fz Mueschenborn-Sonne Failure Criteria with Failure Risk and Alpha Factor of Material Type 127 is supported. .erfh5 and .erf.fz User-Defined Plugin Material Type 185 Output variables results are supported. .erfh5 and .erf.fz PLINK Time History interval curve data plot is corrected. .erfh5 and .erf.fz
Altair HyperGraph 2020 Release Notes
General
New Features
- Extreme Curves
- The Extreme Curves dialog allows you to filter maximum contributors or minimum contributors based on a design aspect from set of curves.
- Curve Correlation
- The Curve Correlation dialog returns correlation metrics in the form of notes using correlation algorithms. These functions will be used to calculate correlation metrics between test and CAE data. Sprague-Geers Combined Metric (SGCM) and Weighted Integrated Factor (WIFac) are supported in this release.
- Add Stackmath Operation
- The Add Stackmath Operation dialog allows you to create a math stack on a curve. After applying a math operation on a curve, the curve is redrawn per the math without creating duplicate curves. The dialog's entity editor displays the math function's parameters, which you can change as necessary. Only a limited number of math functions are supported in this release.
- Advanced Build Plots Enhancements
- From the Ignore strings in requests to ignore strings in requests while plotting multiple files. This functionality is useful when comparing the same results with different prefix ID’s. , use
- Lock Axes
- The Lock Axes option replaces the Auto Fit and Fit Range options on the Axes panel and in the Plot Browser. Options for Lock Axes include Never, Always, and At Import.
Enhancements
- Shock Response Spectrum (SRS)
- The Shock Response Spectrum (SRS), a standard mathematical function that is commonly used in space systems with acceleration time history as the base input, is now included as a standard math function in HyperGraph.
- Bubble Help for Order Numbers
- Waterfall 3D plot curves display bubble help to identify order numbers in the NVH Order Analysis utility.
Resolved Issues
- Templex measure expressions in TableView works correctly.
- Advanced Build Plots panel option is now available in Complex Plots.
- Unused handles in Tcl command layer after clearing a session.
- Stress results issue with H3D file while loading file in Build Plots panel.
- Crash issue when a session is loaded, cleared, and you go switch from HyperGraph to HyperView.
- Different behavior between Build Plots dialog and Build Plots panel while plotting displacement vs. frequency.
- Crash issue involving saving a session.
- Issue with reading T03 file.
- Plotting Campbell diagram issue.
- Weighting type is missing for db 20 case on both Windows and Linux.
- Overlaying reports with curves based on ISO MME files.
- Ctrl+A operation when selecting an extra row in the Build Plots dialog.
- Application crash when plotting TRC’s from an H3D file.
- Issue when Advanced Build Plots dialog and panel are active at the same time.
- Unit error message while plotting SRS function.
- Curve Editor API issues.
- Export CSV through a waterfall plot is crashing HyperGraph.
- Report template issue while loading version 13.0 reports.
- Plot Browser performance issue with large data sets.
- Advanced Build Plots dialog issue.
- OP2 file indices are used instead of frequencies while plotting.
- Improved H3D performance while plotting.
Solver Interfaces
PAM-CRASH 2G Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Supports Total Dynamic Mass Increase (DMAS) result curve from ERFH5 and ERF FEMZIP result files. .erfh5, .erfh5.fz Supports Airbag outputs with qualifier BAGE from ERFH5 and ERF FEMZIP result files. .erfh5, .erfh5.fz
Resolved Issues
- Show unique element IDs instead of duplicate IDs for 1D datatypes belonging to the "Other_1D" pool.
LS-DYNA Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Support for binout file for R11.1 of LS-DYNA binout0000 Fixed an issue with a name and ID mismatch with STBOUT file from LS-DYNA STBOUT
Nastran Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Support all subcases read from the punch file .pch Support for ELEMENT STRESSES for ELEMENT TYPE 33 .pch
Radioss Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Fixed an issue with the name of acceleration components . T01
Resolved Issues
- Reading multiple T0x files when the folder path is too long.
- Reading T01 file on Linux: For some outputs, the Y components were not exposed with the correct name.
- Shell outputs given by /TH/SHELL/SX_JJ, SY_JJ correctly exposed in Y components.
TestData Interface
Enhancements
- Reader enhancements
-
Summary Supported Format Support for empty types with test data .hdf