Create a Datum Plane
- From the HyperGraph 3D toolbar, click the Datum Planes icon, .
- Click Add under the Datum list.
- Select the plane type: Reference plane, Cross section, or Clipping plane.
-
Under Method:, set the orientation method:
- Vertical along the Z axis
- Horizontal along the X axis
- Horizontal along the Y axis
- Three points
- Click two points on the curve to define the Orientation points.
Or
-
If you selected Three points, click three points on the
curve to define the Orientation points.
The plane passes between these points along the Method axis.