HyperLife User's Guide
- 1
- 1D Elements[1]
- 1st-Order Elements[1]
- 2
- A
- Abaqus[1]
- access the context menu derived load steps[1]
- access the context menu exploded view[1]
- access the context menu layer filter[1]
- access the context menu legend[1]
- access the context menu measure panel[1]
- access the context menu notes panel[1]
- access the context menu section cut[1]
- access the context menu set panel[1]
- add a measure group measure panel[1]
- add a note notes panel[1]
- add a resource result math expression builder[1]
- add a section cut[1]
- add a set set panel[1]
- add block loads[1]
- add constant amplitude loads[1]
- add constant loads[1]
- add eigen value/cms loads[1]
- adding field names to a note notes panel[1]
- adding resources result math[1]
- add input psd loads[1]
- additional comments contour panel[1]
- additional post-processing options[1]
- additional post-processing options - annotate model results[1]
- additional post-processing options - display/visualization[1]
- additional post-processing options - results[1]
- add time data loads[1]
- add variable scale loads[1]
- adjust the view[1]
- advanced averaging nodal averaging of elemental results[1]
- animate models[1]
- animation controls[1]
- append and remove objects from a selection[1]
- apply an automatic explosion exploded view panel[1]
- apply cached results[1]
- apply tensor settings to elements in a model tensor panel[1]
- assign materials to parts[1]
- attach a note to an entity notes panel[1]
- attach a note to a window notes panel[1]
- attach a note to coordinates notes panel[1]
- authoring expressions result math[1]
- available PSD stresses input - random response fatigue analysis[1]
- available PSD stresses - random response fatigue analysis[1]
- available PSD stresses setup - random response fatigue analysis[1]
- averaging options[1]
- C
- cache results contour panel[1]
- change directory[1]
- change entity view[1]
- change note attributes notes panel[1]
- change the color of measure group measure panel[1]
- change the display of model elements iso panel[1]
- change the display options contour panel[1]
- change the display options measure panel[1]
- change the display options section cut[1]
- change the display options set panel[1]
- change the entity type input collector[1]
- change the font attributes of measure group measure panel[1]
- change the tensor color by direction tensor panel[1]
- change the tensor color by value tensor panel[1]
- change the tensor drawing mode tensor panel[1]
- change the tensor size tensor panel[1]
- change the value display tensor panel[1]
- change the vector color by direction vector panel[1]
- change the vector color by value vector panel[1]
- change the vector head vector panel[1]
- change the vector size vector panel[1]
- channels, create[1]
- clear an explosion exploded view panel[1]
- clear contour contour panel[1]
- clear iso surfaces iso panel[1]
- clear search string field[1]
- clear tensors tensor panel[1]
- clear vectors vector panel[1]
- color band generation contour panel[1]
- color mode settings[1]
- complex results[1]
- composites post-processing contour panel[1]
- computed results[1]
- configure fatigue analysis using a weld method[1]
- configure fatigue analysis using the en method[1]
- configure fatigue analysis using the factor of safety method[1]
- configure fatigue analysis using the sn method[1]
- configure the results browser[1]
- constant value arguments result math[1]
- context menu[1]
- contour measure curves[1]
- contour panel[1]
- control the display of iso values contour panel[1]
- coordinate systems[1]
- counting layers contour panel[1][2]
- create a contour plot based on elemental results including corner results contour panel[1]
- create a contour plot based on nodal results contour panel[1]
- create a derived load case from a load case list derived load steps[1]
- create a derived load case from a simulation list derived load steps[1]
- create and manage contour plots contour panel[1]
- create a user defined coordinate system[1]
- create a vector plot vector panel[1]
- create cached results[1]
- create channels[1]
- create duty cycle events[1]
- create events[1]
- create fos materials[1]
- create iso surfaces for elemental results iso panel[1]
- create iso surfaces for nodal results iso panel[1]
- create iso surfaces using contour results iso panel[1]
- create modal superposition events[1]
- create new files[1]
- create new materials[1]
- create plot style contour panel[1]
- create plot style tensor panel[1]
- create plot style vector panel[1]
- create random (input PSD with FRF) events[1]
- create random (PSD stresses) events[1]
- create sine sweep events[1]
- create time series events[1]
- create transient response events[1]
- creating and editing layer filters[1]
- critical plane approach[1]
- current support of sweep fatigue analysis[1]
- custom view, edit[1]
- custom view, recall[1]
- custom view, store[1]
- custom view attributes[1]
- D
- Dang Van criterion[1]
- deactivate a note[1]
- deactivate a section cut[1]
- default arguments result math[1]
- define a measure group measure panel[1]
- define a set set panel[1]
- define the linear scaling factor derived load steps[1]
- delete a derived load case derived load steps[1]
- delete a layer filter[1]
- delete a measure group measure panel[1]
- delete an explosion exploded view panel[1]
- delete a note notes panel[1]
- delete a section cut[1]
- delete a user defined coordinate system[1]
- delete cached results[1]
- delete channels, events, and subcases[1]
- delete materials[1]
- deleting a set sets panel[1]
- derived load cases[1]
- difference nodal averaging of elemental results[1]
- display state of graphical manipulators[1]
- dock and undock parts of the user interface[1]
- E
- edit a user defined coordinate system[1]
- edit category legend[1]
- edit custom view[1]
- edit fkm mean stress correction[1]
- edit legend[1]
- edit surface finish and treatment[1]
- edit temperature factor[1]
- edit the contour, vector, or tensor panel legend[1][2]
- E-N approach - fatigue analysis[1]
- E-N approach - multiaxial fatigue analysis[1]
- enter search string field[1]
- entities[1]
- entity editor results browser[1]
- entity selector[1]
- entity view, change[1]
- en tool[1]
- estimate uts[1]
- evaluate[1]
- evaluate the model[1]
- evaluate tool[1]
- events, create[1]
- exclude sets[1]
- expand and collapse folders[1]
- explode a model or component exploded view panel[1]
- exploded view panel[1]
- explode panel[1]
- explode tool[1]
- export a set set panel[1]
- export damage and rainflow matrix data[1]
- export files[1]
- expression builder result math[1]
- extended entity selection menu input collector[1]
- extended entity selection options[1]
- extreme of corner nodal averaging of elemental results[1]
- F
- factor of safety - Dang Van Criterion[1]
- failure evaluation - seam weld fatigue analysis[1]
- fatigue analysis[1]
- fatigue modules[1]
- fatigue properties - seam weld analysis[1]
- field names notes panel[1]
- file formats, supported[1]
- files, create[1]
- files, export[1]
- files, open[1]
- files, save[1]
- filter load cases derived load steps[1]
- filter syntax[1]
- fit a curve by estimating uts - en properties[1]
- fit a curve by estimating uts - sn properties[1]
- fit curve[1]
- fit view[1]
- fkm mean stress correction, edit[1]
- fos tool[1]
- G
- generated PSD stresses - random response fatigue analysis[1]
- graphical editing of the legend and iso-slider[1]
- graphical manipulator[1]
- H
- H3D model export options[1]
- hide[1]
- HL-T: 1000 Uniaxial Stress-Life (S-N)[1]
- HL-T: 1010 Uniaxial Strain-Life (E-N)[1]
- HL-T: 1020 Multiaxial Stress-Life (S-N)[1]
- HL-T: 1030 Multiaxial Strain-Life (E-N)[1]
- HL-T: 1040 Factor of Safety (FOS)[1]
- HL-T: 1050 Spot Weld (CBAR)[1]
- HL-T: 1060 Seam Weld (Fillet)[1]
- HL-T: 1070 Transient Stress-Life (S-N)[1]
- HL-T: 1080 Random Fatigue Analysis Using PSD Stresses[1]
- HL-T: 1090 Random Fatigue Analysis Using FRF Stresses and Power Spectral Density of Loading Versus Frequency (Input PSD)[1]
- HL-T: 1100 Stress Life (S-N) Using Stress History Created from Modal Participation Factors (via a file) and Modal Stress[1]
- HL-T: 1110 Sine Sweep Fatigue Analysis – Stress-Life[1]
- home directory[1]
- hot spot stress - seam weld fatigue analysis[1]
- I
- image plane graphical manipulators[1]
- import and export material databases[1]
- import a set set panel[1]
- include/exclude components from a section cut[1]
- input - sine sweep fatigue analysis[1]
- isolate[1]
- iso panel[1]
- K
- keyboard shortcuts and mouse controls, selection[1]
- keyboard shortcuts and mouse controls, show hide isolate[1]
- keyboard shortcuts and mouse controls exploded view panel[1]
- keyboard shortcuts and mouse controls section cut panel[1]
- keyboard shortcuts and mouse controls set panel[1]
- keyboard shortcuts notes panel[1]
- L
- laser edge overlap - seam weld fatigue analysis[1]
- layer filter[1]
- lens - perspective entity editor results browser[1]
- loadcase tool[1]
- load map tool[1]
- local display tools results browser[1]
- M
- manage files and data[1]
- manage the legend display contour panel[1]
- manage the legend display tensor panel[1]
- manage the legend display vector panel[1]
- map loads[1]
- materials, create[1]
- materials, delete[1]
- materials tool[1]
- maximum averaging nodal averaging of elemental results[1]
- max of corner nodal averaging of elemental results[1]
- measure group entity editor attributes[1]
- measure panel[1]
- measure tool[1]
- mesh display settings[1]
- message dialog[1]
- mid-side node elemental results in contour contour panel[1]
- minimum averaging nodal averaging of elemental results[1]
- min of corner nodal averaging of elemental results[1]
- model info browser context menu[1]
- modeling window[1]
- multiaxial fatigue analysis[1]
- multi-state icons[1]
- N
- nodal averaging of elemental results[1]
- note entity editor attributes[1]
- notes panel[1]
- O
- open files[1]
- other factors affecting fatigue[1]
- other methods for fitting a curve[1]
- other methods for fitting a curve - en properties[1]
- other methods for fitting a curve - sn properties[1]
- output files[1]
- overlap - seam weld fatigue analysis[1]
- overlay result display contour panel[1]
- overlay result display tensor panel[1]
- overlay result display vector panel[1]
- overview[1]
- P
- pan view[1]
- perform extended entity selection[1]
- post-processing Abaqus stress results[1]
- post-processing stress results using the contour panel[1]
- post-process stress results solver independent contour panel[1]
- preferences[1]
- projection rule[1]
- project vectors on a cross section plane vector panel[1]
- Q
- query[1]
- query results contour panel[1]
- query results tensor panel[1]
- query results vector panel[1]
- R
- random response fatigue analysis[1]
- recall custom view[1]
- remove load cases or simulations from a derived load case derived load steps[1]
- rename a derived load case derived load steps[1]
- rename a note[1]
- reset the input collector[1]
- result math operators[1]
- result math output parameters[1]
- results browser[1]
- results browser, entity view[1]
- results browser configuration options[1]
- results browser filter[1]
- results explorer[1]
- ribbon[1]
- rotate, pan, zoom, fit, center[1]
- rotate view[1]
- run analysis tool[1]
- S
- sample derived loadsteps configuration file[1]
- satellite icons[1]
- save files[1]
- save screen captures[1]
- screen captures, save[1]
- seam weld fatigue analysis[1]
- seam weld fatigue analysis implementation[1]
- seam weld fatigue analysis input/output[1]
- section cut entity editor attributes[1]
- section cut graphical manipulators[1]
- section cut panel[1]
- section cuts planar entity editor results browser[1]
- section cuts spherical entity editor results browser[1]
- select a projection rule contour panel[1]
- select a projection rule iso panel[1]
- select a projection rule tensor panel[1]
- select entities using the input collector[1]
- selection[1]
- selection keyboard shortcuts and mouse controls[1]
- select multiple objects simultaneously[1]
- select single objects[1]
- set an active layer filter[1]
- set entity editor attributes[1]
- set panel[1]
- sets tool[1]
- settings, color mode[1]
- settings, mesh display[1]
- setup[1]
- show[1]
- show, hide, and isolate using context menus[1]
- show, hide, and isolate using the show/hide tool[1]
- show and hide isolate using browser icons[1]
- show and hide using browser icons[1]
- show hide isolate keyboard shortcuts and mouse controls[1]
- simple averaging nodal averaging of elemental results[1]
- sine sweep fatigue analysis[1]
- sine sweep fatigue analysis input[1]
- S-N approach[1]
- S-N approach - multiaxial fatigue analysis[1]
- sn tool[1]
- sort entities[1]
- spot weld fatigue analysis[1]
- spotweld fatigue analysis - implementation[1]
- spot weld fatigue - input/output[1]
- status bar[1]
- store and recall custom views[1]
- store custom view[1]
- strain-life approach[1]
- strain-life approach - fatigue analysis[1]
- strain-life approach - mean stress correction[1]
- strain-life sine sweep fatigue analysis[1]
- streamlines graphical manipulators[1]
- stress-life approach[1][2]
- stress-life sine sweep fatigue analysis[1]
- supported weld types[1]
- surface finish and treatment, edit[1]
- systems[1]
- T
- table selection expression builder result math[1]
- tcl console[1]
- temperature factor, edit[1]
- tensor panel[1]
- Tensor Results[1]
- time series load history overview[1]
- tool icons[1]
- tool icons layout[1]
- tracking panel[1]
- tutorial model files, access[1]
- tutorials[1]
- tutorials - modal superposition fatigue analysis[1]
- tutorials - multiaxial fatigue analysis[1]
- tutorials - random response fatigue analysis[1]
- tutorials - sine sweep fatigue analysis[1]
- tutorials - transient fatigue analysis[1]
- tutorials - uniaxial fatigue analysis[1]
- tutorials - weld fatigue analysis[1]
- U
- uniaxial fatigue analysis[1]
- update result files derived load steps[1]
- use add as filter to define search parameters[1]
- user defined coordinate system, create[1]
- user defined coordinate systems[1]
- user interface[1]
- use the extended entity selection menu input collector[1]
- V
- value filter contour panel[1]
- variation percentage control[1]
- vector panel[1]
- view, fit[1]
- view, pan[1]
- view, rotate[1]
- view, zoom[1]
- view controls[1]
- view run history[1]
- view run status[1]
- views - orthographic entity editor results browser[1]
- views - perspective entity editor results browser[1]
- view subcase animations[1]
- view the contour animation of a complex response complex results[1]
- view the contour of a complex response at a certain angle complex results[1]
- visualize results[1]
- visualize the boundaries of a clipped part section cut[1]
- W
- weld tool[1]
- window selection settings[1]
- Z