Import Templates
Templates can be imported by means of the
menu, or by means of the Import toolbar icon .Templates can be created to read ASCII files that are formatted differently, thus supporting import of multiple file formats. The templates are stored in the <install_directory>/io/model_readers/feinput/. Each template works on only one specific format file. To read in metadata, the required headings must be added to the template requests and record blocks. You may wish to examine an example simple file format template.
Connector templates are registered in the spotweld.cfg file under the same directory. For custom templates, a spotweld_format directory must exist in the same location as the master weld file. The spotweld.cfg file must contain only the names of all the registered weld templates. You can also see an example of a master weld file import template.
HyperGraph and HyperStudy Example
An example of an import template used with HyperGraph or HyperStudy is shown here.
// HWVERSION_8.0-100_Dec 1 2006_5
// (c) 2006 - Altair Engineering, Inc. All rights reserved.
// Contains trade secrets of ALTAIR Engineering, INC.
// Copyright notice does not imply publication.
// Copyright (c) 2000 - 2002, Altair Engineering, Inc. All rights reserved.
// Contains trade secrets of ALTAIR Engineering, INC.
// Copyright notice does not imply publication.
// Decompilation or disassembly of this software is strictly prohibited.
// Excel column "Subcase" template
header
{
set mark
type "Boeing Data"
set numrecords= count("Subcase", "END")
set numrequests = 1
set numcomponents = 7
}
record
{
read null
readln request
}
request
{
do numcomponents
{
read component
}
}
Master Weld File Format
An example for a specific master weld file format is shown here.
# Index::T::X::Y::Z::EID1:: EID2:: EID3::
1:: 3:: 48.4375:: 9.375 :: 2.0 :: 3:: 2:: 1::
Weld Template
int num
header
{
type "CONNECTORS"
set mark
find "[0-9]+::"
rewind
set num = 0
if
{
do 1000000
{
if { isdigit } then { set num = sum(num, 1) }
readln null
}
}
set numrecords = num
set numrequests = 9
requests "ID/T/X/Y/Z/EID1/EID2/EID3/EID4"
set numcomponents = 1
components "Value"
}
record
{
read request // ID
qfind "::"
set mark
read request //T
rewind
read num
qfind "::"
read request // X
qfind "::"
read request // Y
qfind "::"
read request // Z
do num
{
qfind "::"
read request // EID
}
set num = diff(4, num)
do num
{
read constant 0 // fake EID
}
readln null
}