*morphhandlepertxyz
Perturbs handles by a specified value.
Syntax
*morphhandlepertxyz entity_type mark_id x_val y_val z_val system_id symmetry_flag constraint_flag
Type
HyperMesh Tcl Modify Command
Description
All handles on the mark will be given a perturbation equal to the x, y, and z values for the given system. If symmetry is used, all handles linked to marked handles by symmetry will also be perturbed. If constraints are used they will be applied to the perturbations.
Inputs
- entity_type
- The type of entity to perturb. Only supported for handles.
- mark_id
- The ID of the mark containing the handles. Valid values are 1 and 2.
- x_val
- The X value of the perturbation.
- y_val
- The Y value of the perturbation.
- z_val
- The Z value of the perturbation.
- system_id
- ID of the coordinate system used to determine perturbation direction. To use the global system, set this value to 0.
- symmetry_flag
- 0 - Do not use symmetry links.
- constraint_flag
- 0 - Do not use constraints, perform auto qa
Example
To perturb handles by 2.0 in the x direction, 1.0 in the y direction, and 0.1 in the z direction using the global system:
*createmark handles 1 1 2 3 4
*morphhandlepertxyz handles 1 2 1 0.1 0 1 1
Errors
if { [ catch {command_name...} ] } {
# Handle error
}