*setettypeelemtypereference()
Sets the element configuration corresponding to the ET type specified in the sensor card image.
Syntax
*setettypeelemtypereference (sensor_card_image_name, config)
Type
HyperMesh Template Command
Description
Sets the element configuration corresponding to the ET type specified in the sensor card image. This is applicable only for ANSYS.
Inputs
- sensor_card_image_name
- A 32-character string enclosed in double quotes that indicates the card image name of the sensor for which the element configuration applies.
- config
- The configuration number of the elements in the sensor card image.
Example
*setettypeelemtypereference("SHELL51",60)
*setettypeelemtypereference("CONTAC52",70)
*setettypeelemtypereference("PLANE53",106)
*setettypeelemtypereference("PLANE53",108)
*setettypeelemtypereference("SOLID46",208)
Version History
14.0