*Graphic() - AirSpring
Creates an AirSpring graphic.
Syntax
*Graphic(gaspr_0,"AirSpring",AIRSPRING, SPDP, spr_varname, ROLLINGLOBE, point_1, point_2, bag_diameter, inner_diameter, outer_diameter, meniscus_height, spring_height)
Arguments
- gaspr_0
- The variable name of the graphic.
- AirSpring
- The descriptive label of the graphic.
- AIRSPRING
- Identifies that the graphics is an Air Spring.
- SPDP
- Keyword that identifies the type of entity the graphic is attached to.
- spr_varname
- Variable name of the spring-damper entity associated with Air Spring.
- ROLLINGLOBE
- The type of Air Spring graphic.
- point_1
- The top connecting points of the Air Spring.
- point_2
- The bottom connecting point of the Air Spring.
- bag_diameter
- The bag diameter. See Comments below.
- inner_diameter
- The inner diameter of the piston. See Comments below.
- outer_diameter
- The outer diameter of the piston. See Comments below.
- meniscus_height
- The meniscus height of the spring. See Comments below.
- spring_height
- The height of the spring. See Comments below.
Example
*Point(p_spr_upr, "Upper spring point")
*Point(p_spr_lwr, "Lower spring point")
*CoilSpring(spring, "Coil Spring",
b_lca,
b_frame,
p_spr_lwr,
p_spr_upr)
*Graphic (gaspr_0, AirSpring,
AIRSPRING, SPDP, spring, ROLLINGLOBE,
p_spr_upr, p_spr_lwr, 400, 250, 400, 150, 300)