poISection SetDeformMode

Toggles the deformable section mode.

Syntax

poISection_handle SetDeformable deformable

Application

HyperView Tcl Modify

Description

This command toggles the deformable section mode.
Note: Deformable section cuts are planar at the simulation step when the deformable mode is activated and stretch out of the plane with the geometry in simulations which follow or precede. Planar section cuts are always cut by a stationary (or undeformable) plane.

Inputs

deformable
Set to true to enable the deformable section cut mode. Set to false for planar section cuts.

Errors

Returns 0 if successful, otherwise an error code.