Remove Cuts

Use the Defeature: Cuts tool to extend surface edges and remove cutouts.

Note: This feature is not supported for a model with discrete geometry.
  1. From the Geometry ribbon, Cleanup tools, click Defeature > Cuts.


    Figure 1.
  2. Select surface edges with cuts.
  3. Remove cuts in the following ways:
    • Remove all selected cuts by clicking Remove All on the guide bar.
    • Remove individual cuts by left-clicking on a selected surface edge.


Defeature: Cuts Tool

An overview of the Defeature: Cuts tool.



Figure 2.

Use the Defeature: Cuts tool to extend surface edges and remove cutouts.

Access
Go to Geometry > Defeature > Cuts.