Define Radiation Output

Use the Output tool to apply radiation output settings to selected surfaces.

  1. From the Radiation ribbon, Thermal Radiation Surfaces tools, click the External tool.


    Figure 1.
  2. Select surfaces.
  3. In the dialog, define the output frequency and/or output time interval at which results are extracted.
  4. Click , activate Agglomerate surfaces, if desired, and enter agglomeration values.
  5. From the guide bar, execute the command in the following ways:
    • Click to confirm your selection and remain in the tool.

      This allows you to continue creating instances and helps you visualize and edit instances with the legend.

    • Click to confirm your selection and exit the tool.