FE Absorb Plies

FE Absorb Plies generates a ply-based model from zone-based properties.

Entities that are created include ply and laminate entities, with optional creation of (OptiStruct/Nastran) PCOMPP.

Exact conversion of the zone-based model to ply-based model depends on the existence of global ply ID’s/name’s on the zones, for example PCOMPG instead of PCOMP. FE Absorb Plies will still run with zones that do not have global data, for example PCOMP, but the conversion relies on internal logic to determine how to connect plies from zone to zone.


Figure 1.
  1. From the menu bar, click Aerospace > Composites > FE Absorb Plies.
  2. Import zone-based models with PCOMP or PCOMPG properties.
    These FE models do not have any plies or laminates. The goal is to create plies and laminates from PCOMP or PCOMPG properties.


    Figure 2. No Plies or Laminates are in the FE Model
  3. Select all of the PCOMP or PCOMPG properties that need to be converted to PCOMPP (ply-based model).
  4. If you are using OptiStruct, select Update TMANUF of ply so that zone layer thickness is copied to PLY card TMANUF (used for sizing optimization).
  5. Optional: If you are using OptiStruct or Nastran profiles, select Create PCOMPP to generate a PCOMPP property for ply-based models.
  6. To delete zone-based properties after the creation of a ply-based model, select Delete properties after absorption.
  7. If a zone ply shape has multiple disconnected regions, generate multiple plies, one for each disconnected region, by selecting Split disconnected ply regions into separate new ply entities.
    After the conversion, laminates and plies are created. However converting a zone-based model to a ply-based model is not deterministic. Many possibilities exist, especially the laminate stacking order. You are advised to check the laminate and reorder, if necessary.


    Figure 3. Ply, Laminate and PCOMPP are Created in the Model after FE Absorb