Supported File Formats

File formats supported by HyperLife.

SN (Uniaxial and Multiaxial)

Format Extension
OptiStruct

Radioss

Note: Radioss result files can imported via the Hyper3D format.
.h3d
Nastran .op2
Abaqus .odb
ANSYS .rst
LS-DYNA .d3plot

EN (Uniaxial and Multiaxial)

Format Extension
OptiStruct

Radioss

Note: Radioss result files can imported via the Hyper3D format.
.h3d
Nastran .op2
Abaqus .odb
ANSYS .rst
LS-DYNA .d3plot

Dang van FOS

Format Extension
OptiStruct

Radioss

Note: Radioss result files can imported via the Hyper3D format.
.h3d
Nastran .op2
Abaqus .odb
ANSYS .rst
LS-DYNA .d3plot

Seam Weld

Format Extension
Grid Point Forces from OptiStruct .h3d
Grid Point Forces from Nastran .op2

Spot Weld

Format Extension
Direct Element Forces from OptiStruct .h3d
Direct Element Forces from Nastran .op2
Note: Support will be extended to further solver results in upcoming builds.

Transient Fatigue Analysis (SN, EN)

Format Extension
OptiStruct

Radioss

Note: Radioss result files can imported via the Hyper3D format.
.h3d
Nastran .op2
Abaqus .odb
ANSYS .rst
LS-DYNA .d3plot

Random Response Fatigue with PSD Stresses

Format Extension
OptiStruct .h3d

Random Response Fatigue with Frequency Response Analysis and PSD Loading

Format Extension
OptiStruct .h3d
Nastran .op2
Abaqus .odb

Sine Sweep Fatigue

Format Extension
OptiStruct .h3d
Nastran .op2
Abaqus .odb