Home
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.

What's New
Get Started
Tutorials
Geometry
Assembly
Connections
Analysis

What's New
View new features for SimSolid 2020.
Get Started
Learn the basics and discover the workspace.
Tutorials
Discover SimSolid functionality with interactive tutorials.
Geometry
Information about treatment and properties of geometric entities in SimSolid.
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.
- Materials
- Rigid Parts
  A rigid part can displace under the loading, but only as a rigid body, i.e. without deformation or strain.
- Spots
  A Spots is a feature that enable applying loads, constraints, or other boundary conditions (BC) to local regions on the surface, instead of applying BC to the whole faces of the model
- Create Coordinate System
  Define a local coordinate system to which boundary conditions/welds may be later applied.
- Create Line on Part
  Create a line that can later be used to generate seam welds.
- Set Part Type as Bolt
  Define parts as bolts.
- Import Datum Points from CSV
  Import datum point sets from an external comma separated values (CSV) file.
- Create Liquid Body
  Create a liquid body between selected faces.
- Assembly Review
  You can clean up the geometry in your model by removing undesired parts.
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
Analysis
Summary of numerical processes available for calculating performance results.

Home
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.

What's New
Get Started
Tutorials
Geometry
Assembly
Connections
Analysis

Assembly

Summary of available functionality for defining the properties and behavior of parts in the model.

Materials
Rigid Parts
A rigid part can displace under the loading, but only as a rigid body, i.e. without deformation or strain.
Spots
A Spots is a feature that enable applying loads, constraints, or other boundary conditions (BC) to local regions on the surface, instead of applying BC to the whole faces of the model
Create Coordinate System
Define a local coordinate system to which boundary conditions/welds may be later applied.
Create Line on Part
Create a line that can later be used to generate seam welds.
Set Part Type as Bolt
Define parts as bolts.
Import Datum Points from CSV
Import datum point sets from an external comma separated values (CSV) file.
Create Liquid Body
Create a liquid body between selected faces.
Assembly Review
You can clean up the geometry in your model by removing undesired parts.

(c) 2020. Altair Engineering Inc. All Rights Reserved.

Intellectual Property Rights Notice | Technical Support