Add Callouts to the Results

Call out and review values for a selected result type at points of interest on your model using the callout icons in the Analysis Explorer.

1. To create a callout at a point of interest, click in the Analysis Explorer, select a Result Type, and then click a point on your model. Box-select to see the maximum value in an area.
   Note: The callout value applies to the currently selected run and load case.
2. To automatically create callouts showing where the minimum and maximum values occur for a result type, select a Result Type, and then click .
   Note: When you select Factor of Safety for the result type, the minimum is shown.
3. Optional: To display callouts in a table, click in the Analysis Explorer. Each callout is specific to a selected run and load case.
   
   
   
   • Selecting a row in the table also selects the callout in the modeling window.
   • To show or hide a single callout, in the Callouts table, Name column, click .
   • To show or hide all callouts, in the Analysis Explorer, click .
   • To sort the order of a column in the table, click the column header. Or you can click or to select Sort Ascending or Sort Descending.
     
     
     
   • To add or delete columns on the table, right-click a column header, and then select or deselect a property.