Create and Edit HyperLaminate Solver Loadcases
Methods to create and edit HyperLaminate solver loadcases.
Create HyperLaminate Solver Loadcases
-
Create loadcase.
- In the browser, right-click on a sub-type under the HLS loadcases branch and select New from the context menu.
- In the browser, right-click on a sub-type under the HLS loadcases branch, then select New from the File menu.
- In the browser, right-click on a sub-type under the HLS loadcases branch, then click (New) on the toolbar.
A new loadcase appears under the selected branch.
A default name and ID are assigned to newly created HLS loadcases.
The newly created loadcase is automatically selected in the Laminate Browser and the Define/Edit pane takes on the appropriate configuration.
- If desired, a new name for the laminate may be entered in the Loadcase field.
- Provide the loadcase definition by filling in the entry fields in the Define/Edit pane.
-
Click Apply to save the
changes for the current HyperLaminate session.
Note: The HyperMesh database is only updated on exit from HyperLaminate.
Edit HyperLaminate Solver Loadcases
-
In the Laminate Browser, select the loadcase to be edited.
The Define/Edit and Review/Results panes are populated with the selected loadcase definition.
-
Edit the data fields.
Data may be cut, copied from, pasted to, or deleted from the data fields using the toolbar, pull-down Edit menu, or Ctrl+X, Ctrl+C, Ctrl+V, and Ctrl+D respectively.
Clicking Clear will reset all fields to zero.
Each change is reflected in the Review/Results pane.
- If desired, a new name for the loadcase may be entered in the Loadcase field.
-
Click Apply to save the
changes for the current HyperLaminate session.
Note: The HyperMesh database is only updated on exit from HyperLaminate.