Global Display Tools
Use this tool set to display or hide the graphics for supported entities in the browser list.
Figure 1.
| Icon | Description |
|---|---|
 |
Elems/Geom/Both (filter for All/None/Reverse and local display control) |
 |
Display All |
 |
Display None |
 |
Display Reverse |
The Elements/Geometry/Both button determines what the other buttons act on; left-click the small triangular downward arrow to reveal a drop-down menu of options. You can select Elements, Geometry, or Both.
Use the Display All, Display None, and Display Reverse buttons at the top of the tab
to change the display state of all assemblies, multibodies, components, groups,
system cols, load cols, and vector cols shown in the list. All displays and None
hides all of the items shown in the list/tree. Display Reverse reverses the state of
all the entities (displaying the hidden, and hiding the displayed). If you have
multiple link entities selected in the browser list, then
Engineering Solutions will only perform these actions on the selected
entities. To deselect all currently selected entities, left-click in any empty
"white space" within the browser list, such as between columns. To clear the
selected entities in the browser, make sure the browser is
active, and then press Esc.
Note: These buttons only affect
the display state. They do not actually remove entities from the model, but only
show or hide them in the graphics area.