Define a Datum Plane as a Reference
- From the HyperGraph 3D toolbar, click the Datum Planes icon, .
- Click Add under the Datum list.
- Set the plane type to Reference plane.
- Select the Position tab.
-
Under Method:, set the orientation method:
- Vertical along the Z axis
- Horizontal along the X axis
- Horizontal along the Y axis
- Three points
- Click two points on the curve to define the Orientation points.
Or
-
If you selected Three points, click three points on the
curve to define the Orientation points.
The plane passes between these points along the Method axis.