Define Rivets
Define a rivet configuration with the FEMSITE utility.
Before you begin, Setup the FEMSITE Utility.
-
From the menu bar, click Connectors > FEMSITE > Define Rivet.
The Self Piercing Rivet Data dialog opens.
- Using the Select Connectors selector, select input.
-
Define the rivet and die.
-
For Rivet, select a Label.
The values in the Shaft Diameter, Head Diameter, Length, Hardness, and Geometry fields are dependent on the Label selected.
-
For Die, select a Label.
The values in the Diameter and Depth field are dependent on the Label selected.
-
For Rivet, select a Label.
-
Define part search parameters.
- For RefMode, choose to use the Property or Part ID as the reference mode for connector assignment.
-
Using the Select Components selector, select the components that
contain the parts to search.
The RefList field lists the assigned IDs that are found after components are selected.
- In the Max number of interactions field, enter the maximum number of connector links to create.
- In the Maximum distance field, enter the search tolerance the FEMSITE executable should use for realization.
-
To reverse the default direction input, enable the Invert Rivet
Direction checkbox.
The rivet direction is defined by the normal of the shells.
- Click Define.