Unused materials |
Checks if there any unused materials in the model. |
Lists all unused materials. |
Not supported. |
Opens the material card image of
/MAT/PLAS_TAB. |
Strain rate coefficient equal to 0 for LAW2 |
Checks if the strain rate coefficient is equal to zero for
material LAW2. |
Lists all of the law2 materials that have a strain rate
coefficient equal to zero. |
Not supported. |
Opens the material card image of either
/MAT/PLAS_JOHNS or
/MAT/PLAS_ZERIL. |
Bad strain rate order in Law36 |
Checks for bad strain rate order in material Law36. The strain
rate should be in increasing order. |
Lists all the law36 materials having bad strain rate
order. |
Not supported. |
Opens the material card image of
/MAT/PLAS_TAB. |
Material with zero density |
Checks if material density is equal to zero. |
Lists all of the materials that have zero density. |
Not supported. |
Opens the corresponding material card image. |
Material with zero modulus |
Checks if material modulus is equal to zero. |
Lists all of the materials that have zero modulus. |
Not supported. |
Opens the corresponding material card image. |
Material with Poisson's Ratio less than 0.001 |
Checks if material Poisson’s Ratio is less than 0.001. |
Lists all of the materials that have Poisson’s Ratio less than
0.001. |
Not supported. |
Opens the corresponding material card image. |
Law2,4,15,27: C and Eps0 defined but F and F blank |
Checks for law2, 4, 15, 27: C and Epsdot0 are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
LAW25 Tsai-Wu: C and Eps0 defined but F and F blank |
Checks for law25, TSAI-WU: C12 and Epsdot0 are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
LAW25 Crasurv: any C and E0 defined but F, F blank |
Checks for law25, CRASURV: C (or any of c1t,c1c,c2t,c2c,c12t) and
Epsdot0 are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law36,59,60: Nfunc > 0 but F and F blank |
Checks for law36, 59, 60: Nfunct > 0, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
LAW44: C and p defined but F and F blank |
Checks for LAW44: C and p are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law48: C,K and E0 defined but F blank |
Checks for law48: C, K and Epsdot0 are defined, and F is blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law52: C and P defined but F and F blank |
Checks for law52: C and p are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law65,77: Nrate or Nload > 1 but F and F blank |
Checks for law65, 77: Nrate/Nload > 1, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law70: Nload > 1 but F and F blank |
Checks for law 70: Nload > 1, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law74: Eps rate scale defined but F and F blank |
Checks for law74: Epsdot_scale is defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Law80: Ceps and Peps defined but F and F blank |
Checks for law80: Ceps and Peps are defined, and F and F are blank. |
Lists all materials that failed the check. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Mat and referenced curves not in same include |
Checks if a material and its referenced curves are in the same
include. |
Lists all of the materials that have curves that are not in same
include file as the material. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Parameter and material title with & |
Checks if a material name has "&" when a parameter is defined
in the model. |
Lists all materials whose name has "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the material
entity. |
Material with invalid name |
Checks if a material name contains no more than 100 characters,
and does not begin with a "/". |
Lists all materials whose names are greater than 100 characters
or begin with "/". |
Not supported. |
Opens the Entity Editor of the material
entity. |
Unused properties |
Checks if there are any unused properties in the model. |
Lists all of the unused properties |
Deletes unused properties. |
Not supported. |
Section shell thickness |
Checks if section shell thickness is less than or equal to
zero. |
Lists all of the shell properties that have a section thickness
less than or equal to zero. |
Not supported. |
Opens the property card image of
/PROP/SHELL. |
Beam or truss property with area less than or equal to 0 |
Checks if beam and truss properties have an area equal to
zero. |
Lists all of the beam and truss properties that have an area less
than or equal to zero. |
Not supported. |
Opens the corresponding truss or beam property card
image. |
Beam property with inertia less than or equal to 0 |
Checks if beam properties have an inertia less than or equal to
zero. |
Lists all of the beam properties that have inertia less than or
equal to zero. |
Not supported. |
Opens the property card image of
/PROP/BEAM. |
Spring property with inertia less than or equal to 0 |
Checks if spring properties have an inertia less than or equal to
zero. |
List all the spring properties that have an inertia less than or
equal to zero. |
Not supported. |
Opens the property card image of
/PROP/SPRING. |
Spring properties with null mass |
Checks if spring properties have null mass. |
Lists all of the spring properties that have null mass. |
Not supported. |
Opens the property card image of
/PROP/SPRING. |
Invalid Icpre value on type 6 |
Checks if I is defined for I, not equal to 14, 17, and 24. |
Lists all properties with icpre!=0 and isolid!= 14,17,24. |
Not supported. |
Opens the Entity Editor of the
entity. |
Negative Gap value on type 2 |
Checks if GAP is negative on Type 2 properties. |
Lists all properties of type 2 with a negative gap value. |
Not supported. |
Opens the Entity Editor of the
entity. |
Parameter and property title with & |
Checks if a property name has "&" when a parameter is defined
in the model. |
Lists all properties whose name has "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the
entity. |
Property with invalid name |
Checks if a property name has no more than 100 characters and
does not begin with a "/". |
Lists all properties whose names are greater than 100 character,
or begin with "/". |
Not supported. |
Opens the Entity Editor of the
entity. |
Prop and referenced entities not in same include |
Checks if a property and its curve, sensor, or system are in the
same include. |
Lists all properties which reference entities that are not in the
same include. |
Not supported. |
Opens the Entity Editor of the
entity. |
Istf is not equal to 0 or 1 for interface type 11 |
Checks if attribute Istf is not equal to zero or one for Inter
type 11. |
Lists all interfaces of type11 that have istf not equal to zero
or one. |
Not supported. |
Opens the interface card image of
/INTER/TYPE11. |
Idel is not equal to 1 for interface type 7 |
Checks if attribute Idel is not equal to one for interface type
7. |
Lists all interfaces of type7 that have Idel not equal to
one. |
Not supported. |
Opens the interface card image of
/INTER/TYPE7. |
Bad Isearch flag interface in interface type 2 |
Checks if attribute Isearch is defined badly. |
Lists all interfaces of type2 that have Isearch not equal to zero
or two. |
Not supported. |
Opens the interface card image of /INTER/TYPE2. |
Bad spotflag in interface type2 |
Checks if Spotflag is badly defined for interface type 2. |
Lists all interfaces of type2 that have a spotflag value not
equal to zero. |
Not supported. |
Opens the interface card image of
/INTER/TYPE2. |
Slave nodes in multiple interfaces |
Checks if slave nodes are in multiple interfaces for
TYPE2. |
Lists all interfaces of type2 that have common slave nodes across
multiple interfaces. |
Not supported. |
Opens the Interface panel and updates the page. |
Un-Tied nodes in interface type 2 |
Checks if there are any free nodes in tied contacts, that is,
contacts of type 2. |
Lists all type2 contacts with free nodes. |
Not supported. |
Not supported. |
Groups and referenced entities not in same include |
Checks if group, master, slave, curves, and rbody are in the same
include. |
Lists all groups whose referenced entities are not in same
include files as the group. |
Not supported. |
Opens the Entity Editor of the group
entity. |
Undefined master or slave in contact |
Checks if groups contain undefined master or slave
entities. |
Lists all groups that reference undefined master or slave
entities. |
Not supported. |
Opens the Entity Editor of the group
entity. |
Unresolved master or slave in contact |
Checks if a contact contains unresolved entities. |
Lists all groups with unresolved master or slave
entities. |
Not supported. |
Opens the Entity Editor of the group
entity. |
Parameter and group title with & |
Checks if a group name has "&" when a parameter is defined in
the model. |
Lists all groups whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the group
entity. |
Group with invalid name |
Checks if a group name has no more than 100 characters and does
not begin with a "/". |
Lists all groups whose names are greater than 100 character or
begin with "/". |
Not supported. |
Opens the Entity Editor of the group
entity. |
Free nodes in the model |
Checks if there are any free nodes in the model. Nodes present in
EREF are also not considered free by the solver. As they represent
the initial positions. |
Lists all of the free nodes in the model. |
Deletes free nodes. |
Not supported. |
Incompatible kinematic conditions on nodes |
Checks if more than one type of imposed conditions is acting on
nodes; for example if nodes are connected to more than one of the
following - rigid elements, spotwelds, boundary conditions and tied
contacts. Based on skew, attached boundary condition directions are
checked if they are constrained in different dofs. |
Lists all of the nodes that have more than one imposed
condition. |
Not supported. |
Opens the Delete panel. |
Systems with axis badly defined |
Checks if the system axes are not defined correctly. |
Lists all of the Systs with axis that are badly defined. |
Not supported. |
Opens the Systs panel and updates the page. |
Skew and nodes not in same include |
Checks if a system and its nodes are in the same include. |
Lists all of the systems that have nodes which are not in the
same include. |
Not supported. |
Opens the Entity Editor of the system
entity. |
Parameter and system title with & |
Checks if a system name has "&" when a parameter is defined
in the model. |
Lists all systems whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the
entity. |
Systems with invalid name |
Checks if a system name has no more than 100 characters and does
not begin with a "/". |
Lists all systems whose names are greater than 100 character or
begin with "/". |
Not supported. |
Opens the EEntity Editor of the entity.
|
Curve has no point |
Checks if the function curve has any points defined. |
Lists all of the function curves that do not have any points
defined. |
Creates a (0, 0) point. |
Opens the Curves panel and updates the page. |
Parameter and curve title with & |
Checks if a curve name has "&" when a parameter is defined in
the model. |
Lists all curves whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the
entity. |
Curve with invalid name |
Checks if a curve name has no more than 100 characters and does
not begin with a "/". |
Lists all curves whose names are greater than 100 character or
begin with "/". |
Not supported. |
Opens the Entity Editor of the
entity. |
1 slave node in Rbody |
Checks if there is only one slave node in a Rbody. |
Lists all of the Rbodies that have only 1 slave node. |
Not supported. |
Opens the Rigids panel and updates the page. |
Admas and nodes not in same include |
Checks if Admas and nodes are in the same include. |
Lists all pf the admas that have nodes which are not in same
include. |
Not supported. |
Opens the Entity Editor of the mass
entity. |
RBody and referenced entities not in same include |
Checks if RBody, nodes, skew, sensor, and surf are in the same
include. |
Lists all of the rbodies that reference entities which are not in
same include as the rbody. |
Not supported. |
Opens the Entity Editor of the
Rbodies. |
RLink and referenced entities not in same include |
Checks if Rlink, nodes, and skew are in the same include. |
Lists all pf the rlinks that have nodes or skew which are not in
same include. |
Not supported. |
Opens the Entity Editor of the
Rlink. |
Cyclic joint and nodes not in same include |
Checks if a cyclic joint and its nodes are in the same
include. |
Lists all of the cyclic joints that have nodes which are not in
same include. |
Not supported. |
Opens the EEntity Editor of the cyclic
joint. |
Beam: 3 nodes aligned |
Checks that the 3 nodes of a beam are non collinear. |
Lists beams with 3 nodes that are collinear. |
Not supported. |
Opens the Bars panel. |
Small rigid body with non-spherical inertia |
Checks if RBODY has non-spherical inertia. |
Lists all small Rbodies that have non-spherical inertia. |
Not supported. |
Opens the Rigids panel and updates the page. |
Spring elements length greater than 35 |
Checks if a spring with a property of
/PROP/SPR_PUL assigned to its component has a
length that is less than 35. |
Lists all spring elements with a length greater than 35. |
Delete the element. |
Not supported. |
Rigid body connected to only one part |
Checks if rigid body slave nodes are connected to more than one
component. |
Lists all of the rigid bodies that are connected to only one
part. |
Not supported. |
Opens the Delete panel. |
Rigid body has free slave nodes |
Checks if all dependent nodes of rigid bodies are connected to
some element. |
Lists all RBODY that have at least one free dependent
node. |
Removes the free end nodes from the rigid body. |
Not supported. |
Free spring elements |
Checks if there are free spring elements |
Lists all of the free spring elements. |
Deletes free spring elements. |
Not supported. |
Free bar2 elements |
Checks if there are free bar2 elements. |
Lists all the free bar2 elements. |
Deletes free bar2 elements. |
Not supported. |
Spring elems with null length |
Checks if spring elements have a null length. Excludes those
attached to properties of type 8. |
Lists all spring elements that have a null length, other than
those attached to properties of type 8. |
Delete the spring elements. |
Not supported. |
Bar2 elems with null length |
Checks of bar2 elements have a null length. |
Lists all bar2 elements that have a null length. |
Deletes the bar2 elements. |
Not supported. |
Mass elements have zero or negative mass |
Checks if there are any mass elements that have zero or negative
mass. |
Lists all mass elements that have zero or negative mass. |
Not supported. |
Opens the Admas panel and updates the page. |
Admas not compatible with 2D analysis |
Checks if admas is present in the model, along with 2D
analysis. |
Lists all admas elements, if the 2D analysis flag is set. |
Not supported. |
Opens the Entity Editor of the
entity. |
Free mass elements |
Checks if there are free mass elements. |
Lists all of the free mass elements. |
Deletes free mass elements. |
Not supported. |
Joint nodes are non-coincident |
Checks if a spring element that has a property of
/PROP/KJOINT2 assigned to its component has a
node1 and node2 that are coincident. |
Lists all spring elements with non-coincident node 1 and node
2. |
Deletes the elements. |
Not supported. |
3-4 Node shells with thickness |
Checks if 3 or 4 noded shell elements have a thickness defined on
the element itself. |
Lists all 3 or 4 noded shell elements with a thickness. |
Not supported. |
Opens the Entity Editor of the
entity. |
Xalea of Random noise less than or equal to zero |
Checks for random noise. You will have a random noise issue if
the attribute XALEA of RANDOM control card is not equal to or less
than zero. |
Lists all the RANDOM control cards that have an attribute XALEA
not equal to or less than zero. |
Not supported. |
Opens the card image of control card
/RANDOM. |
Unused boxes |
Checks if there are unused boxes in the model. |
Lists all unused boxes. |
Deletes unused boxes. |
Not supported. |
Parameter and box title with & |
Checks if a box name has "&" when a parameter is defined in
the model. |
Lists all boxes whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the
entity. |
Boxes with invalid name |
Checks if a box name has no more than 100 characters and does not
begin with a "/". |
Lists all boxes whose names are greater than 100 character or
begin with "/". |
Not supported. |
Opens the Entity Editor of the
entity. |
Component is referring to undefined entity |
Checks if components reference undefined properties or
materials. |
Lists all components containing undefined materials or
properties. |
Not supported. |
Opens the Entity Editor of the
entity. |
Component is referring to unresolved entity |
Checks if components reference unresolved properties or
materials. |
Lists all components containing unresolved materials or
properties. |
Not supported. |
Opens the Entity Editor of the
entity. |
Hourglass possible on component |
Checks if hourglass is possible on a component; if the attached
property has ishell = 1,2 or 3 or isolid = 1 or 2. |
Lists all components with property attributes as mentioned
earlier. |
Not supported. |
Opens the Entity Editor of the
entity. |
Parameter and component title with & |
Checks if a component name has "&" when a parameter is
defined in the model. |
Lists all components whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor of the
entity. |
Comps with invalid name |
Checks if a component name has no more than 100 characters and
does not begin with a "/". |
Lists all components whose names are greater than 100 character
or begin with "/". |
Not supported. |
Opens the Entity Editor of the
entity. |
Part and referenced entities not in same include |
Checks if a part and its associated entities are in the same
include file. |
Lists all parts which reference entities that are not in the same
include file. |
Not supported. |
Opens the Entity Editor of the
entity. |
Unused sets |
Checks if a set is not referenced by another entity. |
Lists all sets which are unused. |
Deletes unused sets. |
Not supported. |
Empty sets |
Checks if a set has entity ids. |
Lists all sets which do not contain any entities. |
Deletes empty sets. |
Not supported. |
Sets with no finite elements or nodes |
Checks if the defined set contains valid finite elements/nodes.
This check does not report sets already reported under "empty
sets". |
Lists all sets which have empty components, sets, and so on
attached to them. |
Not supported. |
Opens the Entity Editor of the
entity. |
Grspri with inconsistent element |
Checks if Grspri contains only spring elements. |
Lists all Grspri that contain more than spring elements. |
Not supported. |
Not supported. |
Grbeam with inconsistent element |
Checks if Grbream contains only beam elements. |
Lists all Grbream that contain more than spring elements. |
Not supported. |
Not supported. |
Grshel with inconsistent element |
Checks if Grshel contains only 4 noded elements. |
Lists all Grshel that contain more than 4 noded shell
elements. |
Not supported. |
Not supported. |
Grsh3n with inconsistent element |
Checks if Grsh3n contains only 3 noded shell elements. |
Lists all Grsh3n that contain more than 3 noded shell
elements. |
Not supported. |
Not supported. |
Grtruss with inconsistent element |
Checks if Grtruss contains only truss elements. |
Lists all Grtruss that contain more than truss elements. |
Not supported. |
Not supported. |
Grquad with inconsistent element |
Checks if Grquad contains only quad elements. |
Lists all Grquad that contain more than quad elements. |
Not supported. |
Not supported. |
Grbric with inconsistent element |
Checks if Grbric contains only brick elements. |
Lists all Grbric that contain more than brick elements. |
Not supported. |
Not supported. |
Entity set refers to undefined entity |
Checks if sets contain undefined entities. |
Lists all sets that reference undefined entities. |
Not supported. |
Opens the Entity Editor for the
entity. |
Entity set is referring to unresolved entity |
Checks if a set contains unresolved entities. |
Lists all sets which refer to unresolved entities. |
Removes unresolved entities from the set. |
Not supported. |
Parameter and set title with & |
Checks if a set name has "&" when a parameter is defined in
the model. |
Lists all sets whose names have "&" when a parameter is
defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Sets with invalid name |
Checks if a set name is no more than 100 characters and does not
begin with "/". |
Lists all sets whose names are greater than 100 characters or
begin with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Grbeam and referenced entity not in same include |
Checks if a Grbeam and its associated entities are in the same
Include file. |
Lists all Grbeams which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grbric and referenced entity not in same include |
Checks if a Grbric and its associated entities are in the same
Include file. |
Lists all Grbrics which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grnod and referenced entity not in same include |
Checks if a Grnod and its associated entities are in the same
Include file. |
Lists all Grnods which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grpart and referenced entity not in same include |
Checks if a Grpart and its associated entities are in the same
Include file. |
Lists all Grparts which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grquad and referenced entity not in same include |
Checks if a Grquad and its associated entities are in the same
Include file. |
Lists all Grquads which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grsh3n and referenced entity not in same include |
Checks if a Grsh3n and its associated entities are in the same
Include file. |
Lists all Grsh3ns which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grshel and referenced entity not in same include |
Checks if a Grshel and its associated entities are in the same
Include file. |
Lists all Grshels which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grspri and referenced entity not in same include |
Checks if a Grspri and its associated entities are in the same
Include file. |
Lists all Grspris which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Grtruss and referenced entity not in same include |
Checks if a Grtruss and its associated entities are in the same
Include file. |
Lists all Grtrusses which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Surf and referenced entity not in same include |
Checks if a Surf and its associated entities are in the same
Include file. |
Lists all Surfs which reference entities that are not in the same
Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Bcs, grnod, skew not in same include |
Checks if Bcs, Grnod, and skew are in same include. |
Lists all bcs that have nodes or skew which are not in same
include. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Inivel, grnod and skew not in same include |
Checks if Inivel, Grnod and skew are in same include. |
Lists all inivel whose nodes or skew are not in same
include. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Impvel, and referenced entities not in same include |
Checks if impvel, grnod, sensor, skew and curves are in the same
include. |
Lists all impvel with nodes, sensor, skew, or curves that are not
in same include as itself. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Impdisp, and referenced entities not in same include |
Checks if impdisp, grnod, sensor, skew, and curves are in the
same include. |
Lists all impdisp with nodes, sensor, skew, or curves that are
not in same include as itself. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Pload, referenced entities not in same include |
Checks if Pload, Surf, sensor, Skew, and Curves are in the same
include. |
Lists all pload with surfs, sensor, contact surfs, skew, or
curves that are not in same include as itself. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Grav, and referenced entities not in same include |
Checks if Grav, Grnod, sensor, Skew, and curves are in the same
include. |
Lists all grav with nodes, sensor, skew, or curves that are not
in same include as itself. |
Not supported. |
Opens the Entity Editor of the load
collector entity. |
Parameter and loadcol title with & |
Checks if a load collector name has "&" when a parameter is
defined in the model. |
Lists all load collectors whose names have "&" when a
parameter is defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Detpoint and referenced entities not in same include |
Checks if a Detpoint and its associated entities are in the same
Include file. |
Lists all Detpoints which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Activ and references entities not in same include |
Checks if an Activ and its associated entities are in the same
Include file. |
Lists all Activs which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Unresolved ids in Activ |
Checks if an Activ contains unresolved entities. |
Lists all Activs which reference entities that are
unresolved. |
Not supported. |
Opens the Entity Editor for the
entity. |
Cload and referenced entities not in same include |
Checks if a Cload and its associated entities are in the same
Include file. |
Lists all Cloads which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Convec and referenced entities not in same include |
Checks if a Convec and its associated entities are in the same
Include file. |
Lists all Convec which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Impacc and referenced entities not in same include |
Checks if an Impacc and its associated entities are in the same
Include file. |
Lists all Impaccs which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Imptemp and referenced entities not in same include |
Checks if an Imptemp and its associated entities are in the same
Include file. |
Lists all Imptemps which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Pfluid and referenced entities not in same include |
Checks if a Pfluid and its associated entities are in the same
Include file. |
Lists all Pfluids which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Radiation and referenced entities not in same include |
Checks if a Radiation and its associated entities are in the same
Include file. |
Lists all Radiations which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Detline and referenced entities not in same include |
Checks if a Detline and its associated entities are in the same
Include file. |
Lists all Detlines which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Waveshapers and referenced entities not in same include |
Checks if a Waveshaper and its associated entities are in the
same Include file. |
Lists all Waveshapers which reference entities that are not in
the same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Laser and referenced entities not in same include |
Checks if a Laser and its associated entities are in the same
Include file. |
Lists all Lasers which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Inout and referenced entities not in same include |
Checks if an Inout and its associated entities are in the same
Include file. |
Lists all Inouts which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Loadcols with Invalid name |
Checks if a load collector name is not more than 100 characters
and does not begin with a "/". |
Lists all load collectors whose names are greater than 100
characters or begin with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Unused BeamSections |
Checks if any beamsection defined in the model is unused. |
Lists all of the unused beamsections in the model. |
Deletes the unused beamsections. |
Not supported. |
Unused parameters |
Checks if there are any unused parameters in the model. |
Lists all parameters that are unused/not referenced in another
entity. |
Deletes unused parameters. |
Not supported. |
Parameter definition in include file |
Checks if parameters are present in include files. If yes, then
give a warning. PARAMETER/LOCAL is currently not supported, hence
the check. |
Lists all parameters that are defined in the include
file. |
Not supported. |
Opens the Entity Editor of the parameter
entity. |
Fcut is greater than or equal to 0 for Accel |
Checks if Fcut is greater than zero on an Accel card. |
Lists all Accels with Fcut less than or equal to zero. |
Not supported. |
Opens the Entity Editor for the
entity. |
More than one Accel on the same node |
Checks if more than one Accel is acting on the node. |
Lists all Accels repeated on the node. |
Not supported. |
Opens the Entity Editor for the
entity. |
Accel and referenced entities not in same include |
Checks if an Accel and its referenced entities are in the same
Include file. |
Lists all Accels which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Node id and skew id for accel card are unresolved |
Checks if node_id and skew_id are unresolved for the accel
card. |
Lists all Accels with an unresolved node_id or skew_id. |
Not supported. |
Opens the Entity Editor for the
entity. |
Nodes with same skew in different TH |
Checks if the same node with the same system is referenced in
more than one TH. |
Lists all output blocks that contain a node that is repeated with
the same system. |
Not supported. |
Opens the Entity Editor for the
entity. |
TH with repeated entities |
Checks if entities are repeated within each TH. |
Lists all output blocks that contain repeated node IDs. |
Not supported. |
Opens the Entity Editor for the
entity. |
Parameter and output block title with & |
Checks if an output block name has "&" when a parameter is
defined in the model. |
Lists all output blocks whose names have "&" when a parameter
is defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Output blocks with invalid name |
Check if an output block name is no more than 100 characters and
does not begin with "/". |
Lists all output blocks whose names are greater than 100
characters or begin with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Th and referenced entities not in same include |
Checks if Th and its associated entities are in the same Include
file. |
Lists all Th which reference entities that are not in the same
Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Parameter and contact surf title with & |
Checks if a contact surface name has "&" when a parameter is
defined in the model. |
Lists all contact surfaces whose names have "&" when a
parameter is defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Contact surfs with invalid name |
Checks if a contact surface name is not more than 100 characters
and does not begin with "/". |
Lists all contact surfaces with names greater than 100 characters
or begins with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Monvol, surfs, sensors, curves not in same include |
Checks if a control volume and its associated surface, sensor, or
curve are in the same Include file. |
Lists all control volumes which reference entities that are not
in the same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Control vols with invalid name |
Checks if a control volume name is not more than 100 characters
and does not begin with "/". |
Lists all control volumes with names greater than 100 characters
or begin with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Parameter and control vol title with & |
Checks if a control volume name has "&" when a parameter is
defined in the model. |
Lists all control volumes whose names have "&" when a
parameter is defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Incompatible material |
Checks if materials and properties are compatible with xref and
refsta. |
Lists all xref/refsta with incompatible materials or
properties. |
Not supported. |
Opens the Entity Editor for the
entity. |
Eref incompatible material |
Checks if materials and properties are compatible with
Eref. |
Lists all Eref with incompatible materials or properties. |
Not supported. |
Opens the Entity Editor for the
entity. |
XRef or Refsta, and nodes not in same include |
Checks if Xref/Refsta and its nodes are in the same
include. |
Lists all impdisp with nodes, skew, or curves that are not in the
same include as itself. |
Not supported. |
Opens the Entity Editor of the control
volume entity. |
Airbag1 and referenced entities not in same include |
Checks if an Airbag1 and its associated entities are in the same
Include file. |
Lists all Airbag1s which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Area and referenced entities not in same include |
Checks if an Area and its associated entities are in the same
Include file. |
Lists all Areas which reference entities that are not in the same
Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Commu1 and referenced entities not in same include |
Checks if a Commu1 and its associated entities are in the same
Include file. |
Lists all Commu1s which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Fvmbag1 and referenced entities not in same include |
Checks if a Fvmbag1 and its associated entities are in the same
Include file. |
Lists all Fvmbag1s which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Pres and referenced entities not in same include |
Checks if a Pres and its associated entities are in the same
Include file. |
Lists all Pres which reference entities that are not in the same
Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Perfect gas and referenced entities not in same include |
Checks if an Perfect gas and its associated entities are in the
same Include file. |
Lists all Perfect gases which reference entities that are not in
the same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Airbag and referenced entities not in same include |
Checks if an Airbag and its associated entities are in the same
Include file. |
Lists all Airbags which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Commu and referenced entities not in same include |
Checks if a Commu and its associated entities are in the same
Include file. |
Lists all Commus which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editorfor the
entity. |
Fvmbag and referenced entities not in same include |
Checks if a Fvmbag and its associated entities are in the same
Include file. |
Lists all Fvmbags which reference entities that are not in the
same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Sections, N1, N2, N3 not in same include |
Checks if a Cross Section and its associated nodes are in the
same Include file. |
Lists all Cross sections which reference nodes that are not in
the same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Sections, sets and frames not in same include |
Checks if a Cross section and its associated sets and frames are
in the same Include file. |
Lists all Cross sections which reference sets and frames that are
not in the same Include file. |
Not supported. |
Opens the Entity Editor for the
entity. |
Parameter and cross section title with & |
Checks if a cross section name has "&" when a parameter is
defined in the model. |
Lists all cross sections whose names have "&" when a
parameter is defined in the model. |
Not supported. |
Opens the Entity Editor for the
entity. |
Cross sections with invalid name |
Checks if a cross section name has no more than 100 characters
and does begin with "/". |
Lists all cross sections whose names are greater than 100
characters or begin with "/". |
Not supported. |
Opens the Entity Editor for the
entity. |
Prop17 Incompatible with /INISHE_ORTHO_LOC or
/INISH3_ORTHO_LOC |
|
Lists all properties linked to elements referenced by
/INISHE/ORTHO_LOC or
/INISH3/ORTHO_LOC tables. |
Not supported. |
Opens the Entity Editor for the property
entity. |
Incompatible materials within SUBMODEL block |
|
|
|
|
Elementcluster referring to undefined sets |
|
|
|
|
Incompatible properties within SUBMODEL block |
|
|
|
|
Unused transformations |
|
|
|
|
Plies with in-consistent def_ortho |
|
|
|
|
Empty positions |
|
|
|
|
Is there a common node among DAMPING |
|
|
|
|