*bar2()

Syntax

*bar2 (id type node1 node2 propertyid dofsa dofsb localyz localyy localyz offsetax offsetay offsetaz offsetbx offsetby offsetbz directionnodeid directionnodeydir)

Type

HyperMesh HMASCII Command

Inputs

id

The ID of the element (must be unique).

type

The element type.

node[1,2]

The node IDs of the element.

propertyid

The ID of the property (must be a valid property or 0).

dofsa

The active degrees of freedom at end a.

dofsb

The active degrees of freedom at end b.

localyx, localyy, localyz

Make up the local y axis vector.

offsetax, offsetay, offsetaz

Make up the offset vector at end a.

offsetbx, offsetby, offsetbz

Make up the offset vector at end b.

directionnodeid

The ID used to specify the y or z axis.

(0, if not used.)

directionnodeydir

1, if the node specifies y axis direction.

0, if the node specifies z axis direction

Errors

None.