*bar3()
Syntax
*bar3 (id type node1 node2 node3 propertyid dofsa dofsb localyz localyy localyz offsetax offsetay offsetaz offsetbx offsetby offsetbz directionnodeid directionnodeydir)
Type
HyperMesh HMASCII Command
Inputs
- id
- The ID of the element (must be unique).
- type
- The element type.
- node[1,2,3]
- The node IDs of the element.
- propertyid
- The ID of the property (must be a valid property or 0).
- dofsa
- The active degrees of freedom at end a.
- dofsb
- The active degrees of freedom at end b.
- localyx, localyy, localyz
- Make up the local y axis vector.
- offsetax, offsetay, offsetaz
- Make up the offset vector at end a.
- offsetbx, offsetby, offsetbz
- Make up the offset vector at end b.
- directionnodeid
- The ID used to specify the y or z axis. 0, if not used.
- directionnodeydir
- 1, if the node specifies y axis direction.
Errors
None.