Pick Point Info

Obtain results at one or more points on the model surface.

  1. In the Project Tree, open the Analysis Workbench.
  2. Click (Pick info).
  3. In the dialog, select a Response type from the drop-down menu.
  4. Specify the Coordinate system in the drop-down menu.
  5. Choose one of the following methods for specifying points:
    Option Process
    Pick point
    1. Select the Pick point radio button.
    2. In the modeling window, select points on the model surface.
    Datum point set
    1. Select the Datum point set radio button.
    2. Select the desired point set in the drop-down menu.
    Pick face
    1. Select the Pick face radio button.
    2. In the modeling window, select faces on the model surface.
      Note: This option provides an average of the result value over the selected face. In addition to average values, the total thermal flux is provided.
    The dialog will display the points' coordinates, as well as analysis and results quantities.
  6. Optional: Activate the Evaluate average checkbox to determine average values between multiple selected points/faces.
  7. Optional: Save info to CSV file.
    1. Click the Save to CVS button.
    2. In the dialog, enter a file name and select a save location.
    3. Click Save.