general
General defaults for the Model Verification instance.
GUI Settings
- project
- Project name displayed in the PowerPoint report
- action
- Type or Run to be selected.
- auto-close
- After the check and report is complete the GUI will close automatically if this is ON.
- number-of-processes
- Number of parallel processing to be executed. It is advised to keep 2 CPUs for System purpose.
- number-of-processes-max
- Maximum number of parallel processors allowed (Total # CPUs – 2).
- assembly-level
- Indicates the number of levels above the part to be considered as the assembly name. The assembly name is used in Intersection, Comparison and Reports. Parts will be skipped if the base variant assembly names are not the same during Comparison.
- metalTrim-level
- Indicates the number of levels above the part to be considered as the Sheet
Metal or TRIM Name.
- METAL-METAL
- All the parts inside the METAL folder will be checked.
- TRIM-TRIM
- All the parts inside the TRIM folder will be checked.
- METAL-TRIM
- Parts across the METAL and TRIM folder will be checked. No check will be executed inside the METAL or TRIM folders.
- port
- The value to be edited in case a specific port is needed for Thread communication.
- timezone
- Not valid.
- deleteLogFiles
- Deletes all of the scratch files after the report generation. All of the XML, HM and image files will remain if this is OFF.
- maxloopcount
- Maximum number of recovery limits in case of a crash or the application not responding.
- wait-time
- Maximum wait time for a process to wait for a check per part or pair of parts.
- progress-time-scale
- Progress bar interval. You can increase the value.
- configa-application
- File extension of Parasolid children file.
- Model/Preview/Import-type
- When previewing large CAD data, the CAD option allows you to read the CAD as it is. The Facet option reads CAD by converting to facets. This is done for performance and visualization purposes.
Representation Settings
- reptype-name/CAD
- Allowable representation type for original CAD data read. Do not change.
- reptype-name/Common Midsurface
- Allowable representation type for midsurface data. Do not change.
- reptype-name/FE
- Allowable representation type for FEM data. Do not change.
Solid Recognition
- model/close-shell/free-edge-allowance
- Allowable number of free edges. If the actual number of free edges in the CAD is less than this value solid CAD data is used.
- model/close-shell/mesh/free-edge-allowance
- Allowable distance between two nodes to be automatically equivalenced or stitched.
auto-rename
- tool/auto-rename
- The CAD name will be assigned to the part name of the browser by considering the string pattern.
auto-renumber
- tool/auto-renumber
- The CAD name will be assigned to the PID of the browser by considering the string pattern. By default the IDs will be renumbered from 1. This must be turned OFF if the PID and part names are managed in CAD attributes.
- type
- Part name subexpression along with the PID value will be assigned.
- start-with
- Part name subexpression along with the PID value will be assigned.
- increment
- Part name subexpression along with the PID value will be assigned.
- rename/part-id/pattern
- The decimal value, except excluding the first 0, will be read from the file name and assigned as PID.
- rename/part-id/format
- Regular subexpression will be used.
- rename/part-name/pattern
- The string value will be read from the file name and assigned as PartName.
- rename/part-name/format
- Part name subexpression along with thePID value will be assigned.
- pName To PID map
- Below Letter to Integer table is used while renumbering the PID if ON. The normal auto-renumber will be applied if OFF.
- Letter to integer map
- Mapping table to change the string value to decimal value for the PID Column.
- String-length
- Number of digits to be considered for the renumber using the mapping table.