The Aero Tools can be accessed after setting the Aerospace User Profile. This User Profile can be found under Engineering Solutions. Several tools are available and listed under the Aerospace toolbar. We will discuss several of these tools in this chapter.
Click an icon to learn more about the Aerospace Tools in HyperMesh.
In this exercise you will learn about the Beam Auto Property Tool. The purpose of the Beam Auto Property tool is to quickly generate cross section beam elements properties from a solid. Typically this would be used to help generate global loads models.
Click the See It icon to see a demonstration and click the Do It icon to download a PDF exercise to try on your own.
Download the models here. (Note: Depending on your browser, you might need to right click on the link and save the models.)
In this exercise you will learn use things learned in earlier chapters to re-mesh a part, clean up the mesh, organize the model, manage the ID's of the entities and set up fasteners using the Fastener Setup tool in the Aerospace user profile.
Click the See It icon to see a demonstration and click the Do It icon to download a PDF exercise to try on your own.
Download the models here. (Note: Depending on your browser, you might need to right click on the link and save the models.)
 |
 |
|
|
|
 |
 |
