*hf_RotateBinderSurf

Rotate the binder around an axis in space. The binder is automatically identified.

Syntax

*hf_RotateBinderSurf plane angle

HyperMesh Tcl Modify Command

This command rotates the binder around an axis. The axis of rotation is given by the plane/vector plane and the magnitude of rotation is given by.

plane: The temporary plane/vector ID created using the *createplane command.
angle: Angle of rotation.

To rotate the binder around the x-axis with respect to the base point (7258.2607, -1324.2481, 1468.3770) by an angle of 90 degrees:

*createplane 1 1.0000 0.0000 0.0000 7258.2607 -1324.2481 1468.3770
*hf_RotateBinderSurf 1 90

To rotate the binder around y-axis with respect to the base point (7258.2607, -1324.2481, 1468.3770) by an angle of -90 degrees:

*createplane 1 0.0000 1.0000 0.0000 7258.2607 -1324.2481 1468.3770
*hf_RotateBinderSurf 1 -90

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

10.0