*setcuttingplanecolor
Sets the color of the base of the specified cutting plane.
Syntax
*setcuttingplanecolor axis mode color
Type
HyperMesh Tcl Modify Command
Description
Sets the color of the base of the specified cutting plane.
Inputs
- axis
- The axis that is normal to the plane. Valid values are:
- 0 - the plane with x-axis as its normal
- 1 - the plane with y-axis as its normal
- 2 - the plane with z-axis as its normal
- mode
- Sets the display mode for the specified cutting plane. Valid values are:
- 0 - solid color
- 1 - contours
- color
- The color to use when mode=0. Valid values are 1-64.
Example
To set the cutting plane with y-axis as its normal to use solid color 24:
*setcuttingplanecolor 1 0 24
Errors
if { [ catch {command_name...} ] } {
# Handle error
}