*renumbersolverid

Syntax

*renumbersolverid entity_type mark_id start_id incr_val offset_val offset_flag reserved_1 reserved_2 reserved_3

Type

HyperMesh Tcl Modify Command

Description

This command renumbers the solver IDs for entities of entity_type contained on mark_id.

This command works in two ways depending on the entities selected. If the selected entities have solver IDs, the command will renumber the solver IDs and not the HyperMesh internal IDs. However, if the selected entities do not have solver IDs, the command will renumber the HyperMesh internal IDs (see *renumber).

Inputs

entity_type

The type of entity selected for renumbering.

mark_id

The mark that contains the entities. Valid values are 1 and 2.

start_id

Integer value > 0 specifying the starting value.

incr_val

Integer value > 0 specifying the renumbering increment.

offset_val

Integer value to use for offsetting. Can be positive or negative as long as after renumbering all entities will have a positive ID.

offset_flag

Flag to specify whether to use offsetting.

0 Use start_id and incr_val and ignore offset_val.

1 Use offset_val and ignore start_id and incr_val.

reserved_1

Reserved for future development. Value = 0.

reserved_2

Reserved for future development. Value = 0.

reserved_3

Reserved for future development. Value = 0.0.

Example

To renumber the solver IDs of the displayed elements starting from 100 with an increment of 1:

*createmark elems 1 displayed
*renumbersolverid elems 1 100 1 0 0 0 0 0.0

Errors

if { [ catch {command_name...} ] } {
   # Handle error
}